BizTalk Server, Exchange Server 2003, Exchange Server 2010, Sharepoint 2010, Microsoft Dynamics CRM, Microsoft Dynamics GP, Microsoft Dynamics AX, Microsoft Dynamics Sure Step, Microsoft Dynamics NAV Tutorials

Change page: < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ... > | Displaying page 1 of 27, items 1 to 30 of 799.

Managing Exchange Server 2013 clients : Configuring mail support for Outlook (part 4) - Repairing and changing Outlook mail accounts

When you first configure Outlook on a computer, you can configure it to connect to an Exchange server, to Exchange Online, to Internet email, or to another email server.

Managing Exchange Server 2013 clients : Configuring mail support for Outlook (part 3) - Configuring Outlook for Exchange, Adding Internet mail accounts to Outlook

f you didn’t configure Outlook to use Exchange the first time it was started, don’t worry: You can change the Outlook configuration to use Exchange. It does take a bit of extra work, however.

Managing Exchange Server 2013 clients : Configuring mail support for Outlook (part 2) - First-time configuration: Connecting to Exchange Server

You can install Outlook as a standalone product or as part of Microsoft Office. Outlook can be used to connect to the following types of email servers

Managing Exchange Server 2013 clients : Configuring mail support for Outlook (part 1) - Understanding address lists, offline address books, and autodiscover

Address lists are collections of recipients in an Exchange organization. Offline address books (OABs) are copies of address lists that are downloaded and cached on a computer so an Outlook user can access the address book while disconnected from the Exchange organization.

How To Unlock An Account From Active Directory (Windows Server 2008)

It often happens that a user forgets his/her password and instead of asking theDomain Administrator to reset the password, they attempt to login by using the trial and error method.

Setup Free Media Server To Stream Videos To DLNA Compatible TV, Xbox 360 & PS3 (Play Station 3)

LXiMedia is an open source DLNA media server application. It transcode and stream media across a network with other Computers, Xbox 360, Play Station 3 and DLNA compatible TVs.

Microsoft Sharepoint 2013 : Office Web Apps Configuration Options (part 6) - Binding to a SharePoint Farm Using HTTPS

Creating the binding is relatively straightforward; just keep in mind the previously mentioned SSL complexity included with this configuration

Microsoft Sharepoint 2013 : Office Web Apps Configuration Options (part 5) - Using the HTTPS Protocol

That completes the installation and configuration of the Office Web Apps farm. From here you need to bind that farm to whichever host you choose.

Microsoft Sharepoint 2013 : Office Web Apps Configuration Options (part 4) - Configuring the Security Token Service, Using the HTTP Protocol

If there is any chance your web app will use HTTP, then you need to change the Security Token Service to allow OAuth to pass over HTTP.

Microsoft Sharepoint 2013 : Office Web Apps Configuration Options (part 3)

Now that you have the certificate exported to a file, you can import it to the Trusted Root Certification Authorities store on the necessary machines.

Microsoft Sharepoint 2013 : Office Web Apps Configuration Options (part 2)

In this example you should do to that, at a minimum, on the OWA and SharePoint server. If you have a client machine from which you want to test the Office Web Apps, you also need to do it there.

Microsoft Sharepoint 2013 : Office Web Apps Configuration Options (part 1)

If after reading the preceding section you think it might be a great idea to use HTTPS but the only thing holding you back is lack of an SSL certificate, you are in luck. IIS supports creating a self-signed certificate, and this section will walk you through the steps to take advantage of this capability.

Microsoft Sharepoint 2013 : Some Sample PowerShell Scripts (part 2) - Creating the Search Service Application in SharePoint 2013 Server

While you can create your Search service application in Central Admin, doing so will create all your Search databases with GUIDs at the end. No one likes GUIDs.

Microsoft Sharepoint 2013 : Some Sample PowerShell Scripts (part 1) - Creating Your SharePoint 2013 Farm with PowerShell, Creating Managed Accounts and Service Application Pools

As indicated by the comments, this script will work with SharePoint 2010 or SharePoint 2013. It employs not only several SharePoint cmdlets we have covered (those for which the noun starts with “SP”), but also many new PowerShell techniques such as asking for input, error control, and flow control.

VMware View 5 Architecture : Virtual (part 4) - Network, Storage

Various types of network traffic are required in a virtualization environment. The nature and segregation of this traffic should be fundamental to any good virtualization design. Y

VMware View 5 Architecture : Virtual (part 3) - vCenter Server

vCenter Server is the management server for vSphere 5. It is the one-stop shop for managing everything in your virtual infrastructure. It runs on a Windows Server and requires a database for storing critical data.

VMware View 5 Architecture : Virtual (part 2) - VMware vSphere 5 Architecture, VMware vSphere 5, VMware ESXi, VMware vSphere 5

With vSphere 5, VMware has moved completely to ESXi. ESXi has replaced the ESX native installation and comes in two installation options: embedded or installable mode.

VMware View 5 Architecture : Virtual (part 1) - Infrastructure Introduction

When you are considering a large deployment of VMware View, it is best to follow all the steps in developing valid hardware estimates.

VMware View 5 : Establishing a Performance Baseline (part 10)

The next dashboard, View Users (see Figure 32), gives detailed information on specific user sessions, such as the current active sessions. You can use it for troubleshooting specific end-user problems such as connection drops and poor performance.

VMware View 5 : Establishing a Performance Baseline (part 9)

Now that the adapter is properly configured, you can go ahead and add the custom dashboards designed to display the important information from your VMware View environment.

VMware View 5 : Establishing a Performance Baseline (part 8)

To install the adapter for View, you need to complete several steps. The first one is to install the adapter on a server. The vCenter Operations View Adapter supports Windows 2003 or 2008 R2 server.

VMware View 5 : Establishing a Performance Baseline (part 7)

In addition to a high level of information on overall health of the environment, you can also enable alerting. To do this, you have to enable SMTP reporting on the UI appliance, as you did when installing and configuring vCenter Operations, and complete the following steps.

VMware View 5 : Establishing a Performance Baseline (part 6)

In addition to Workload, Health also measures the anomalies found in the environment. vCenter Operations tries to understand what is normal and abnormal behavior for an object in your vSphere environment by using dynamic as well as static thresholds (

VMware View 5 : Establishing a Performance Baseline (part 5)

vCenter Operations Manager looks to vCenter to supply a license. Therefore, the next procedure is to ensure a license key is installed in vCenter so that when you register vCenter Operations to the vCenter Server, it is properly enabled.

VMware View 5 : Establishing a Performance Baseline (part 4) - Configure vCenter Operations

After the vApp is deployed, you must do several things to properly configure vCenter Operations to get everything working. You should complete the configuration before deploying the integration to VMware View.

VMware View 5 : Establishing a Performance Baseline (part 3) - Deploy vCenter Operations

When the IP pool is in place, you are ready to import the virtual appliance. To deploy the virtual appliance, complete these steps

VMware View 5 : Establishing a Performance Baseline (part 2) - Create an IP Pool

The specific steps to install vCenter Operations require the preparation of an IP pool and then the deployment of an Adapter virtual machine. You can then import and configure the vCenter Operations vApp and then configure the adapter.

VMware View 5 : Establishing a Performance Baseline (part 1) - Installing vCenter Operations

vCenter Operations (vCOPs) Manager ships as a virtual appliance and comes in several different versions; Standard, Advanced, Enterprise, and Enterprise Plus.

Sharepoint 2013 : Organizing people and work - Creating a calendar list - Switch calendar views

SharePoint 2013 calendar lists provide a convenient and visual manner so that the members of the team of project detect big steps of project, meetings, and other events. You can show the lists of calendar inside daily, the weekly magazine, and the monthly sights.

Sharepoint 2013 : Organizing people and work - Adding multiple tasks and subtasks - Update multiple tasks in a standard view, Add subtasks

There could be periods when you would like to copy articles of Microsoft Excel in a list of the tasks, but you do not want to lock them one by one. With SharePoint 2013, you can quickly add entries in the sight of list, or you can stick the contents directly.