My Audio Design – MAD, as they are commonly known– make some
of the most respected hi-fi loud speakers available today. Now, following the
success of the Grand MS studio monitors (winner of a coveted Music Tech Excellence
Award) the company is extending its range of audiophile-grade monitoring
systems.
The 1920S is a compact 2-way passive design of similar
proportions to the classic BBC LS3/5a, arguably the most revered of all
mini-monitors. Although the 1920S is roughly the same height and width as the
BBC design, it’s a good deal deeper, featuring a bass-reflex port at the rear.
In recent times, active speakers with built-in amplifiers
have monopolised the studio monitor market at the expense of high-quality passive
designs. While there’s a lot to be said for the convenience of active monitors,
many of them display similar sound characteristics – namely, a forward, stark
and bright presentation with tight, lean bass. This type of sound is sometimes
described as ‘accurate’ and ‘truthful’ although, in all honesty, the torrent of
detail retrieval is often the result of lower treble emphasis.
The 1920S takes a different approach, sounding rich, fulsome
and far bigger than the size would lead you to believe. One visitor to our
studios thought he was listening to our huge ATC main monitors with their
12-inch (31cm) bass drivers, when we were actually using the diminutive 1920S.
Mad 1920S Monitors.
Each monitor features two drivers: an ultra-precision 145mm
mid-bass unit coupled with a 22mm neodymium supersonic tweeter that reaches all
the way up to 40kHz. The cross over frequency is 2kHz and sensitivity is quoted
as 90dB, so these monitors can be driven to high SPLs with a modestly rated
amplifier (30–40W will be plenty).The cabinet makes use of MAD’s own DRC
(Damping Resonance Control) technology, while internal wiring consists of
99.9997% pure litz copper conductors and 99.997% diamond silver to wire the
tweeter. Our review samples came in two beautiful high-gloss finishes – one
Ferrari Redand the other Piano Black – although designer Timothy Jung informs
us that other finishes are also available.
The sound of the 1920S couldn’t be more different from the
usual compact designs that dominate the near field monitor market. While many
of these designs have an explicit, seat-of-your pants delivery, the MADs
possess a much more relaxed, organic flow, revealing the complete musical
picture and allowing lengthy use without any listener fatigue. There’s no
exaggerated treble, but the 1920S never sound dull, offering an unforced
presentation that enables precise instrument placement within an expansive
sound stage. Similarly, the way in which they portray depth and width is quite
astonishing.
The sound of the
1920S couldn’t be more different from the usual compact designs that dominate
the near field monitor market.
On first listen, the 1920S might sound slightly laid-back,
especially when A/B-tested against more aggressive-sounding monitors; however,
this smoother approach is due to the complete absence of mid range glare that
plagues some near field designs. What these monitors do offer is a sweet top
end that blends seamlessly with a deep, focused mid range, under pinned by an impressively
solid low end. There ar-firing port handles much of the LF output, deftly
avoiding the mid-basshump that is built-in to many compact designs to give a
false impression of quantity. Instead, the low end has weight and depth,
revealing the punch and texture of kick drums and allowing bass instruments to
play a proper tune without any booming one-note waffle.
We noted during tracking sessions that the 1920S offered a
much more 3D character to individual instruments than our Yamaha NS10s,
detailing room ambience that was masked by our usual monitoring systems. In a multitrack
mixdown, we were able to detect the individual sounds of two instruments – an
electric guitar and a Fender Rhodes playing a phrase in unison – where our
NS10s gave a more homogenised, indistinct sound.
The 1920S offered
a much more 3D character to individual instruments than our Yamaha NS10s.
My Audio Design has created a wonderful monitor with the
1920S. It’s delicious, classic sound is a refreshing change from the
unforgiving nature of many modern boxes and it’s equally at home relaying both
minimal acoustic recordings and complex mixes of all kinds. A very well
thought-out and sophisticated design.
Specifications
·
Ultra-precision mid/bass driver ·
Neodymium supersonic tweeter ·
Point-to-point wired crossover with silver solder ·
DRC cabinet technology ·
Hand-built in England
|